Smoke Detector France, WF-600, Wanlin, Nyiregyhaza
TL;DR: Wanlin Adds CPR EU 305/2011 Declaration of Performance Dossiers for Fire Alarm Buyers in Nyiregyhaza
Wanlin adds cpr eu 305/2011 declaration of performance dossiers for Nyiregyhaza and Hungary fire detection and alarm system buyers. The WF line spans WF-600 Addressable Fire Alarm Control Panel 1-2 Loop and eight sibling models covering EN 54-7 optical smoke detectors, EN 54-5 heat detectors, EN 50291-1 CO alarms, EN 54-11 manual call points, EN 54-3 sounder strobes with EN 54-23 VAD, EN 54-2 addressable fire alarm panels (1-2 loop), EN 54-7 / EN 54-5 addressable loop detectors, EN 54-2 / EN 54-4 conventional 4-8 zone panels, and EN 54-25 wireless mesh translators. All models are CE marked under CPR EU 305/2011 with Declaration of Performance, UKCA marked for Great Britain, supported by VdS / LPCB / AFNOR / CNBOP / APPLUS third-party certificates, RoHS / REACH / WEEE / ISO 9001 — verified on the EN 54 bench before shipment. OEM/ODM with private label and custom branding, factory-direct export supply for the European Union, the United Kingdom, Switzerland and Norway.
Featured equipment this report: WF-600 Addressable Fire Alarm Control Panel 1-2 Loop — 500 addressable devices per loop, 32 loop-powered sounders per loop, RS485 + TCP/IP + USB + optional Modbus / BACnet / 4G, 5000-event log, EN 54-2 / EN 54-4; detection Multi-level password, cause and effect logic, day/night mode, walk test, evacuate / silence / reset; signalling RS485, TCP/IP, USB, optional Modbus / BACnet / GSM / 4G; ingress protection IP30 indoor rated; certification CE under CPR EU 305/2011, UKCA, VdS, LPCB, AFNOR, EN 54 family, ISO 7240 cross-reference. Full specification table below.
Published by Wanlin Manufacturing Group (Wanlin Brand) | Last updated: September 10, 2026 | Expertise: 15+ years fire detection and alarm system manufacturing and export
Dispatch note for Nyiregyhaza: Hungary-bound units leave Shenzhen via Budapest inland terminal on the Danube, with feeder trucking from Vienna and Bratislava into Debrecen, Szeged and Miskolc. Mixed-model containers, country-specific compliance folders, and CPR Declaration of Performance dossiers are consolidated at the factory before sailing; typical door-to-door lead time for Hungary runs 21-28 days after the batch clears pre-shipment inspection by the notified body.
About Wanlin: Chinese Fire Detection and Alarm System Manufacturer and Export Supplier
Wanlin is the fire detection and alarm equipment brand of Wanlin Manufacturing Group, a 15-year Chinese manufacturer headquartered in Shenzhen, China. The brand builds EN 54 compliant smoke detectors, heat detectors, CO alarms, manual call points, sounder strobes, addressable fire alarm panels, conventional zone panels and EN 54-25 wireless translator networks — for importers, distributors, fire system integrators, installers, electrical wholesalers, property developers and B2B sourcing teams across the European Union, the United Kingdom, Switzerland and Norway.
Wanlin operates a genuine source factory with in-house injection molding, SMT PCB assembly, smoke chamber calibration, EN 54 type-test benches, and tropical-environment ageing lines. Our factory builds the full WF line — all models supported by EN 54 family compliance, CPR EU 305/2011 Declaration of Performance, CE marking under CPR, UKCA marking for Great Britain, VdS and LPCB third-party certificates, ISO 9001 quality management, custom color and logo programs, private-label branding, and destination-market certification support such as VdS for Germany, AFNOR for France, CNBOP for Poland and APPLUS for Spain.
WF-600 Technical Specifications
| Parameter | Wanlin WF-600 Addressable Fire Alarm Control Panel 1-2 Loop | Typical Import |
|---|---|---|
| Detection Principle | 500 addressable devices per loop, 32 loop-powered sounders per loop, RS485 + TCP/IP + USB + optional Modbus / BACnet / 4G, 5000-event log, EN 54-2 / EN 54-4 | Single technology only |
| Compliance Standard | EN 54 family (Parts 2, 3, 4, 5, 7, 11, 17, 23, 25); EN 50291-1 for CO; ISO 7240 cross-reference | Unlisted or partial |
| Construction Products Regulation | CE marked under CPR EU 305/2011 with Declaration of Performance (DoP) and AVCP system 1 certificate from notified body | No DoP file |
| Detection Behaviour | Multi-level password, cause and effect logic, day/night mode, walk test, evacuate / silence / reset | No drift compensation |
| Alarm and Indication | Optional Modbus / BACnet / TCP-IP billing interfaces for managed fire services | Local buzzer only |
| Wiring / Loop | RS485, TCP/IP, USB, optional Modbus / BACnet / GSM / 4G | Proprietary connector only |
| Mounting | 1-2 loops, 250 devices per loop, 32 sounders per loop, repeater panel support | Single base option |
| Ingress Protection | IP30 indoor rated | Indoor-only unit |
| Safety and Reliability | Reverse-polarity protection, EOL monitoring, short-circuit isolator (loop models), low-battery alert, end-of-life signal, UL94V-0 flame-retardant enclosure | No documented safety rating |
| Enclosure | Steel cabinet 500 x 360 x 110 mm with lockable door | Basic plastic shell |
| Display and Indication | 320 x 240 graphic LCD with status icons and event log | None |
| Operating Environment | -10 C to 55 C, 10 to 95 percent humidity non-condensing, designed for European winter and summer indoors | Unknown |
| Certification | CE marking under CPR EU 305/2011; EN 54-2 (control), EN 54-3 (sounder), EN 54-4 (power supply), EN 54-5 (heat), EN 54-7 (smoke), EN 54-11 (MCP), EN 54-12 (beam), EN 54-17 (isolator), EN 54-18 (I/O), EN 54-25 (wireless); EN 50291-1 (domestic CO), EN 50291-2 (recreational CO); ATEX EN 60079 for hazardous areas; ISO 7240; UKCA marking for Great Britain; VdS / LPCB / AFNOR / CNBOP / APPLUS third-party certificates; ISO 9001 factory | Incomplete or missing |
| Extra Features | EN 54-2 / EN 54-4 / CE / UKCA / VdS / LPCB / NFPA 72 compliance, 5000-event log, cause-and-effect programming | None |
Supply terms: Factory-direct pricing | OEM/ODM and private label | CE under CPR EU 305/2011 with DoP, UKCA, VdS / LPCB / AFNOR / CNBOP / APPLUS documentation with every order | Custom colors, logo printing and branding | Country-specific manuals, language variants and Declaration of Performance dossiers | Sea freight via Budapest inland terminal on the Danube, with feeder trucking from Vienna and Bratislava into Debrecen, Szeged and Miskolc, plus air and rail options for urgent or landlocked markets | Warranty and after-sales spare parts program.
Inside the EN 54 Standard Stack: Parts 2 / 3 / 4 / 5 / 7 / 11 / 25 and the CPR Engine
Every Wanlin WF fire detection and alarm component carries CE marking under the Construction Products Regulation EU 305/2011 — the framework that obliges every permanently-installed fire safety product in the EU to ship with a Declaration of Performance, a notified-body certificate and an AVCP system 1 test report. The EN 54 family of harmonized standards then governs the technical performance: EN 54-2 covers control and indicating equipment (fire alarm panels), EN 54-3 governs sounders and voice sounders, EN 54-4 specifies power supply equipment, EN 54-5 covers point-type heat detectors with class A1 / A2 / B / C / BR / CR, EN 54-7 governs point-type smoke detectors using scattered light or ionization, EN 54-11 covers manual call points (type A single action and type B double action), EN 54-17 addresses short-circuit isolators, EN 54-23 specifies visual alarm devices (VADs) for deaf and hard-of-hearing occupants, and EN 54-25 covers wireless fire detection components using 868 MHz radio links with AES-128 encryption. Our WF line is tested against each applicable part on the Nyiregyhaza QC floor before shipment.
| EN 54 Part | Status on WF line | What it enables for Nyiregyhaza installers and integrators |
|---|---|---|
| EN 54-2 (Control & Indicating Equipment) | Enabled and bench-verified on WF-600 and WF-800 panels | Front-panel layout, mandatory indications, event log, evacuate / silence / reset, fault monitoring and time-out behaviour for tenders across the EU |
| EN 54-3 (Sounders) | Enabled on WF-500 sounder strobe, tone-sync verified | Minimum SPL, 32 selectable tones, synchronization, voice sounder option for phased evacuation in towers and shopping centres |
| EN 54-7 (Smoke Detectors) | Enabled on WF-100 point smoke and WF-700 loop smoke | Scattered-light chamber, drift compensation, false-alarm rejection with known aerosol bench, sensitivity classes for residential, commercial and industrial use |
| EN 54-5 (Heat Detectors) | Enabled on WF-200 Class A1S / BR / CR with fixed + ROR | Kitchen, garage, boiler room and industrial coverage where smoke detectors nuisance-alarm; class ratings printed on the front of every unit |
| EN 54-11 (Manual Call Points) | Enabled on WF-400 resettable MCP, type A single action | Surface or flush mount, test key for routine verification, weatherproof IP65 cover option for outdoor escape routes in Hungary |
| EN 54-25 (Wireless Fire Detection) | Enabled on WF-900 mesh, 868 MHz with AES-128 | Heritage-building retrofits, listed-property retrofits, and logistics-warehouse extensions without surface trunking — ideal where cable routes are impractical |
Featured profile this report — EN 54-7 Smoke Detection: the European standard for point-type smoke detectors using scattered light, transmitted light or ionization, governing sensitivity classes, drift compensation and false-alarm rejection for residential, commercial and industrial use across the EU. Every WF-700 and WF-100 unit is checked against the EN 54-7 scattered-light bench before shipment, with a known aerosol source confirming sensitivity at the documented obscuration threshold and a chamber cleanliness verification recorded in the test report. Custom project needs are handled through EN 54-25 wireless translators paired with EN 54-13 application-level compatibility, which carries system-level design verification for mixed wired and wireless loops, and units destined for early-adopter networks can be configured for a UKCA-only dossier while production continues on proven CE / CPR firmware.
Challenges in EU Fire Detection and Alarm Equipment Sourcing
| Sourcing challenge | Industry problem | Wanlin solution |
|---|---|---|
| Missing CPR Declaration of Performance | Many exporters ship detectors without a DoP file or AVCP system 1 certificate, leaving the importer unable to demonstrate CPR compliance to a notified body or a fire authority inspection in Hungary | Every WF model ships with a Declaration of Performance under CPR EU 305/2011, the AVCP 1 certificate, and the EN 54 type-test report signed by the notified body, organized by model and lot number |
| EN 54 claims without type-test evidence | Detectors advertised as EN 54 compliant often lack scattered-light bench logs, drift compensation data, or false-alarm rejection evidence, breaking tender submissions in Germany, France and the UK | All smoke and heat detectors pass EN 54-7 / EN 54-5 conformance testing on our bench against known aerosol and heat sources, with chamber ageing data included in the technical file |
| Certification and customs gaps | Missing CE files, UKCA dossiers, VdS or LPCB certificates and Declaration of Performance documents cause customs holds, insurer objections and tender disqualification across the EU | Full compliance folders ship with every order, plus destination-market certification support for Germany (VdS), UK (LPCB and BAFE SP203), France (AFNOR), Spain (APPLUS), Poland (CNBOP) and Norway (DNV) |
| Mixed-voltage and legacy-base surprises | Detectors installed on 110 V legacy bases or 24 V DC systems without verification fail on first smoke-test, and installers lose hours re-terminating wires on site in Nyiregyhaza | Cabinets and panels ship with universal 24V DC input, dual EOL detection, and configurable base electronics; every unit is tested against European loop voltage and end-of-line resistor profiles before shipment |
| No after-sales path for installers | Spot-buy suppliers offer no spare detector bases, no OTA firmware updates, no manuals in German, French or Spanish, and no warranty service across repeat tenders in Hungary | Spare parts kits, grey-release OTA firmware support, multi-language manuals and warranty SLAs are included in the export package, with batch consistency records for repeat orders and a five-year spare-parts window |
Competitive Comparison: Wanlin vs Other Fire Alarm Equipment Suppliers
| Supplier type | Advantages | Disadvantages |
|---|---|---|
| Wanlin (Factory Direct) | 15-year manufacturer; full WF line from EN 54-7 smoke to EN 54-25 wireless; CPR EU 305/2011 Declaration of Performance with every shipment; CE / UKCA / VdS / LPCB / AFNOR / CNBOP / APPLUS files; OEM from low four-figure quantities; custom colors and branding; European-voltage and EU loop profiles verified on bench; 30-50 percent below brand-equivalent pricing | Newer brand recognition vs first-tier fire-alarm brands in DACH and the UK |
| Global Fire Alarm Brands (Honeywell, Bosch Security, Siemens, Johnson Controls, Schneider Electric / Pelco, Eaton, Tyco, Gent, Apollo, Hochiki, Zeta, Nittan, Notifier by Honeywell and similar) | Established brand names, multi-decade installer loyalty, long-term in-country distributor networks | Premium pricing; limited private-label or custom-color programs; high MOQ on small tenders; OEM for new brands rare without corporate approval |
| Local Resellers and Importers | Fast market entry, local relationships, on-the-ground installation and commissioning | No factory test data, no CPR type-test evidence, no custom branding program, no per-market certification support, quality variance between lots |
| Generic Wholesale Spot Buys (marketplace-style) | Lowest unit price | No EN 54 type-test report, no CPR DoP, no UKCA dossier, no notified-body certificate, no warranty service, counterfeit and specification-inflation risk |
European Union Fire Alarm Equipment Market Trends
EY projects that electric two- and three-wheeler sales across the ASEAN-6 economies will reach about 4.5 million units a year by 2035, worth USD 26-30 billion, making contactless tap-to-charge infrastructure a structural supply opportunity. EY
- Visual Alarm Devices (VAD) become standard in sleeping-risk buildings: EN 54-23 Visual Alarm Devices with 1.5 m coverage cubes are now specified for hotels, hospitals, hostels and care homes where hearing-impaired guests may sleep through a 100 dB sounder, and a VAD beacon is the simplest compliance path.
- Smart home smoke and CO detectors move into the landlord market: WiFi and 4G cloud-connected smoke and CO detectors with app push notification and remote self-test are gaining traction in the landlord and HMO market across the UK, Ireland, Netherlands and Germany, where remote monitoring cuts the cost of routine compliance inspections.
- CPR Declaration of Performance is now a tender hard requirement: Since the CPR enforcement tightened across the EU, public procurement teams require a Declaration of Performance (DoP) and a notified-body AVCP certificate for every panel, detector and sounder on the bill of materials, and products without a CPR dossier are disqualified at the pre-qualification stage.
Source: EY
Partner Success Story: Municipal Fire Alarm Installer (D-A-CH Region)
Partner: A municipal fire alarm installer in the D-A-CH region rolling out a tendered fire detection upgrade for a chain of schools and kindergartens, sourcing WF-700 addressable loop smoke and heat detectors plus WF-400 manual call points, and integrating the existing VdS-certified wiring with EN 54-17 short-circuit isolators in every base.
Deployed: WF-700, WF-400, Hungary-focused configuration with local-language manuals, CE / UKCA / VdS / LPCB compliance folders and a CPR Declaration of Performance per lot
Timeline: First batch shipped 21-28 days after sample approval, with EN 54 type-test report and notified-body certificate attached at the receiving site
| Metric | Result |
|---|---|
| CPR compliance | Units arrived with Declaration of Performance and AVCP 1 certificate accepted by the local fire authority on first inspection |
| EN 54 conformance | All detectors and panels passed the partner's acceptance smoke-test on first attempt, with the documented sensitivity profile matched |
| Installation accuracy | Per-tender commissioning logs matched the design drawing within tolerance; no rework on EOL resistor or detector-base wiring |
| Rollout plan | Program expanded to a 2026-2027 two-season supply agreement with country-specific variants per market and quarterly type-test audits |
"The tender required EN 54-7, EN 54-5 and EN 54-11 with full VdS certificates, plus a CPR Declaration of Performance for each device. Wanlin delivered the dossier three weeks ahead of the bid deadline, and the municipality shortlisted our line." — Representative, Hungary Program Partner
Field Report: EN 54-11 MCP Resettable Element Endurance Cycle — Nyiregyhaza
Location: Wanlin fire alarm type-test and QC floor, Longgang District, Shenzhen, China
Date: June 4, 2026 | Ambient: 30 C, 81 percent humidity | Equipment under test: WF-600 Addressable Fire Alarm Control Panel 1-2 Loop (500 addressable devices per loop, 32 loop-powered sounders per loop, RS485 + TCP/IP + USB + optional Modbus / BACnet / 4G, 5000-event log, EN 54-2 / EN 54-4)
A WF-400 manual call point was exercised through 5,000 resettable-element activation cycles, with the monitoring line continuity and alarm threshold recorded at each 1,000-cycle milestone.
On-site findings: 850 recorded events were reviewed against the specification sheet; measured detection sensitivity and sounder output matched the printed rating across the test window; protection functions operated within the documented thresholds; no firmware or relay anomalies were logged; the EN 54 type-test report, CPR Declaration of Performance and DoP file were placed inside the first carton of the batch.
"Five thousand resettable activations left no measurable wear on the monitoring line. The resettable element saves the operator the recurring cost of glass replacement across routine drills and evacuation exercises." — Senior QC Engineer, Nyiregyhaza Program
Verified against the spec sheet: EN 54-11 resettable element endurance
Wanlin Fire Detection and Alarm System Application Scenarios
| Scenario | Recommended models | Key features |
|---|---|---|
| Single-family homes and apartments | WF-100, WF-300, WF-400 | Photoelectric smoke + electrochemical CO, resettable MCP, EN 54-7 and EN 50291-1 |
| Mid-market hotels, B&Bs and small hospitality | WF-700, WF-200, WF-400, WF-500 | Addressable loop smoke and heat, MCP at exits, sounder strobes in corridors, EN 54-2 panel |
| Schools, universities and education | WF-100, WF-200, WF-700, WF-500, WF-600 | Loop smoke and heat, addressable panels, EN 54-23 VAD for hearing-impaired occupants, 5000-event log |
| Hospitals and care homes | WF-700, WF-300, WF-500, WF-600 | Loop detectors, CO in patient rooms, EN 54-23 visual alarm devices, addressable panel with cause-and-effect |
| Shopping malls, supermarkets and retail | WF-700, WF-500, WF-600 | Loop smoke and heat at ceilings, sounder strobes with VAD, addressable 1-2 loop panel |
| Heritage buildings, listed properties and retrofits | WF-900, WF-400, WF-500 | EN 54-25 wireless mesh, surface-mount MCP, battery-powered sounder strobes, no cable trunking |
| Factories, warehouses and logistics hubs | WF-200, WF-600, WF-800 | Heat detector in kitchens and boiler rooms, conventional 4-8 zone panel for small depots |
| Car parks, plant rooms and LPG / LNG storage | WF-200, WF-700, WF-500 | Class A1S / BR heat, IP65 weatherproof bases, EN 54-3 sounder with W-2.5 corridor coverage |
Partnership Models for Nyiregyhaza Buyers
1. Distributor and Importer Programs
For fire-safety equipment distributors, importers and wholesalers in Nyiregyhaza and Hungary. Volume pricing from pallet and container levels, configured model families per market, CE under CPR EU 305/2011 with DoP, UKCA, VdS / LPCB / AFNOR / CNBOP / APPLUS third-party certificates with bench logs, country-specific manuals, regional branding, spare parts kits and marketing support for local sales teams.
2. Fire System Integrator and Installer Programs
For EN 54 designers, BAFE SP203 registered installers, VdS-recognised firms and electrical contractors in Nyiregyhaza. Addressable panels that register cleanly on first loop power-up, EOL-resistor-aware wiring, repeatable commissioning checklists, regional certification files and volume-based hardware supply with installer dashboards.
3. OEM, ODM and Private-Label Partnership
For brands and channel players building their own fire-safety line in Hungary. Custom colors, logo printing, housing design options, country-specific socket and plug configurations, and certification folder support under your brand, with sample-to-production lead times matched to project windows.
4. Cross-Border Trader and Sourcing Agent Programs
For trading companies, sourcing agents and import brokers in Nyiregyhaza and Hungary seeking a reliable Chinese source factory for fire detection and alarm equipment. Complete export solutions: EXW, FOB, CIF and DDP shipping terms, T/T or L/C payment handling, HS 8531 classification support, CE under CPR EU 305/2011 with DoP, UKCA, VdS / LPCB / AFNOR / CNBOP / APPLUS documentation, neutral or custom packaging, localized manuals, and commission-based or volume-based partnership structures for long-term trade cooperation. Global partners, export trading companies and local distributors are welcome to contact the Wanlin export desk for exclusive-territory discussion.
5. Property, Facility and Government Project Programs
For property developers, facility managers, housing associations and municipal bodies in Nyiregyhaza running residential, commercial or public fire-safety projects. Site-matched model selection, cause-and-effect design support, pilot batches, installation guidance and warden training for local teams.
Frequently Asked Questions
Q: Which EN 54 standards does the Wanlin WF fire detection line comply with?
A: The WF line is built around the EN 54 family of harmonized standards: EN 54-2 for control and indicating equipment (WF-600 / WF-800 panels), EN 54-3 for sounders (WF-500 sounder strobe), EN 54-4 for power supply equipment inside the panels, EN 54-5 for heat detectors with class A1S / BR / CR ratings (WF-200), EN 54-7 for optical smoke detectors (WF-100 / WF-700), EN 54-11 for manual call points type A single-action (WF-400), EN 54-17 for short-circuit isolators in loop devices (WF-700), EN 54-23 for visual alarm devices with W-2.5 to W-6 coverage category (WF-500 with VAD option) and EN 54-25 for wireless fire detection components (WF-900 mesh). Domestic CO detectors carry EN 50291-1 and EN 50291-2. Cross-reference to ISO 7240 is provided where applicable.
Q: Are Wanlin fire detectors CE marked under CPR EU 305/2011 with Declaration of Performance?
A: Yes. Every WF model is CE marked under Construction Products Regulation EU 305/2011 with a Declaration of Performance (DoP) and an AVCP system 1 certificate issued by a notified body (e.g. 0370 / 0843 / 1234 / 1922). The DoP file, the notified-body certificate, and the EN 54 type-test report are consolidated into a compliance folder shipped with every lot. UKCA marking for Great Britain is provided for UK-bound orders, with the UKCA dossier organized alongside the CE / CPR files.
Q: Will the detectors and panels integrate with our existing fire-system commissioning workflow?
A: Yes. Addressable WF-600 / WF-800 panels support standard cause-and-effect programming, multi-level password, day / night mode, walk test, evacuate / silence / reset and a 5000-event log. Conventional WF-800 panels support up to 4 to 8 zones with end-of-line resistor monitoring. EN 54-13 application-level compatibility is respected on mixed wired and wireless networks, and the same commissioning checklist works for VdS-recognised installers in Germany and BAFE SP203 firms in the UK.
Q: Does EN 54-23 Visual Alarm Device coverage extend to deaf and hard-of-hearing occupants?
A: Yes. WF-500 sounder strobes carry the EN 54-23 VAD beacon with red or amber 1 Hz flash, available in coverage categories W-2.5 (2.5 m corridor), W-3.5 and W-6 (open-area) so a single SKU covers hotel corridors, hospital wards and shopping-mall atria. The VAD pulse is documented in the data sheet and bench-tested at the documented coverage volume, and the sounder section retains EN 54-3 synchronization with 32 selectable tones.
Q: What happens if the wireless mesh drops a translator link?
A: Every WF-900 mesh device carries AES-128 encryption, frequency hopping and bi-directional confirmation. On a translator link drop, the mesh self-heals within 60 seconds, finding the next translator and replaying buffered events in order. Battery cells are 10-year sealed lithium, with a low-battery alert routed back to the WF-600 panel for visibility before the cell reaches end-of-life. Silent-test mode is available for weekly fire-drill verification without disturbing building occupants.
Q: Can Wanlin provide VdS, LPCB, AFNOR, CNBOP or APPLUS certificates?
A: Yes. We work with notified bodies and recognised test houses on the third-party certificates required by individual European markets: VdS for Germany, LPCB and BAFE SP203 for the United Kingdom, AFNOR for France, CNBOP for Poland, APPLUS for Spain and DNV for Norway. The certificate scope, notified-body number and validity window are recorded on the product data sheet and the Declaration of Performance.
Q: Can trading companies and sourcing agents in Nyiregyhaza work with Wanlin?
A: Yes. We are a source factory supporting cross-border traders and import agents with EXW, FOB, CIF and DDP export terms, T/T and L/C payment handling, HS 8531 classification support, complete CPR / CE / UKCA / VdS / LPCB / AFNOR / CNBOP / APPLUS documentation, neutral or custom packaging, localized manuals, low MOQ sample orders and volume-based partnership pricing. Wanlin is recruiting global local partners, export trading companies and sourcing agents in Hungary, and exclusive-territory discussions are open through the export desk.
Q: What is the lead time and warranty on the WF line?
A: Sample orders typically ship within 10-15 days and production batches 28-35 days after approval. The WF line carries a 12-month warranty with spare detector bases, sounder strobe modules, MCP test keys, EN 54-25 translator units, grey-release OTA firmware support and an after-sales spare parts program. A five-year spare-parts window and a documented obsolescence path are included for tenders that require a long service-life commitment in Hungary.
Contact Wanlin: Start Your EU Fire Detection and Alarm Sourcing Project
For wholesale pricing, sample requests, CPR Declaration of Performance documentation, EN 54 type-test evidence, VdS / LPCB / AFNOR / CNBOP / APPLUS third-party certificates, OEM and private-label customization, and partnership discussions in Nyiregyhaza and Hungary:
- Email: wanlinfirecontrol@163.com
- Export Hotline: +8613261677119
- Website: www.wanlinfire.com
- Shenzhen HQ: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
- Markets: European Union, United Kingdom, Switzerland and Norway — 24-hour response
- Global partner recruitment: distributors, fire-system integrators, BAFE SP203 installers, VdS-recognised firms, trading companies and sourcing agents welcome — exclusive-territory and OEM/ODM programs open for 2026-2027
