Best RFID Card Charging Station for Fleets Manufacturer | Cebu, Philippines - CE OCPP Wanlin
Executive Summary: RFID Card Charging Station for Fleets for Global Buyers
The part of the story that changed the buyer's math For housing and fleet sites, the WL-RF8 pairs eight sockets with time-of-day tariff rules and roaming-ready card exports. Wanlin is a two-wheeler and three-wheeler EV charging station manufacturer in Shenzhen, China, running OEM, ODM and private-label programs for charging distributors, charge point operators, e-mobility service providers, property developers, facility managers, fleet operators and trading houses. What the field test actually measured with landed cost at 30% under the branded alternative at the same retail point for importers who source factory-direct, with per-model CE / RoHS / IEC 61851 documentation, OCPP 1.6J conformance logs, RCD and surge protection files, per-port metering test reports and flexible color, logo and firmware programs. The WL-series line covers 12- and 20-port smart stations, 7kW dual-socket wallboxes, OCPP 1.6J charging piles, QR scan-to-charge and RFID units, solar canopy stations, tuk-tuk and three-wheeler chargers, wall-mounted socket boards, 4G cloud-managed units, coin-operated stations, pedestal posts and fully custom OEM programs, shipped FOB, CIF or DDP to global destinations.
Published by Wanlin | Last updated: September 05, 2026 | Expertise: two-wheeler and three-wheeler EV charging station OEM and ODM manufacturing for global markets
Case Study: Cebu Delivery Fleet Manager Sourcing Success
The first message asked for a catalog. The real question surfaced two weeks later. The quiet shift in the category is buyers moving from flat-rate power strips to metered, OCPP-connected stations.
The pilot ran for two full months of monsoon weather, Tran Van Bao selected Wanlin as their EV charging manufacturing partner. The contract went to the factory that could show RCD trip-time data and sealed enclosures, not the lowest quote.
- A 48-hour continuous-load rack cycles every station to catch relay and meter failures early
- CE, RoHS and IEC 61851-1 documentation ships with every commercial order
- Custom color runs as low as 50 units on existing tooling keep first launches affordable
The burned-socket shelf in the maintenance room had shrunk to zero after the old boards were swapped out.
Problem Analysis & Field Report: Why Global Buyers Need RFID Card Charging Station for Fleets
Nobody flagged it at the packing station; the market flagged it first. A fleet yard operator documented charging losses after drivers swapped cards and the board logged nothing.
Field case: A social housing tower in Cebu deployed the WL-RF8 after taped-over keyed sockets created a fire risk. RFID access plus per-socket metering closed the audit gap, and the housing authority copied the setup to three more towers.
Why it matters for global buyers:
- shared punch cards and keyed sockets defeat any charging audit
- the fix was a card-per-rider local list with offline authorization
- logs must queue and upload after outages, not vanish
Wanlin EV Charging OEM & ODM Services for Global Distributors and Brands
Wanlin runs OEM and ODM programs for buyers who want their own charging station line without building a factory. Customization covers:
- Cosmetics: cabinet colors, logo printing, port labels and decal sets on existing tooling from 50 units
- Firmware: tariff logic, load caps, timer behavior, display language and payment flows
- Protocol layer: OCPP 1.6J builds pointed at buyer-specified CSMS endpoints, security profiles and custom DataTransfer messages
- Exclusive tooling: new enclosure molds and cable-path tuning for brands that need a design nobody else can copy
- Connected builds: 4G cloud dashboards and fleet portals under the buyer brand when a software layer is required
Product Introduction: Wanlin RFID Card Charging Station for Fleets
The station that passed all those field tests is built around a metering and protection core that is now standard across the line.
Core Features:
- China-Based Manufacturing: Wanlin produces in Shenzhen with in-house SMT lines, enclosure and cable assembly, and burn-in racks that load-test and cycle every finished station before packing
- Certification Transparency: CE, RoHS and IEC 61851-1 documentation is provided per model, and OCPP 1.6J conformance logs plus metering accuracy files travel with the shipment so containers clear without surprises
- Tested Claims: meter accuracy, RCD trip time and enclosure sealing are verified on samples from every production lot, and the reports are recorded per batch
- Private Label Support: cabinet colors, logo, firmware, tariffs, packaging, manuals, decals and spare kits are customized for each program
- Global Shipping Experience: we pack for charging distributors, property developers, fleet operators and e-mobility buyers across Southeast Asia, the Middle East, Europe, North America and Africa
Technical Specifications
| Parameter | Wanlin Specification |
|---|---|
| Authorization | MIFARE RFID with a 10,000-card local list |
| Offline Mode | full offline authorization with queued session logging |
| Ports | 8 metered sockets per cabinet |
| Roaming | card ID export for multi-operator roaming schemes |
| Connectivity | OCPP 1.6J over 4G |
| Tariff Engine | time-of-day and tiered kWh tariff rules |
| Display | LCD with card balance and port status |
| Protection | per-port overload, leakage and surge |
| Housing | IP54 steel cabinet with IK10 panel |
Application Scenarios for Global Market
| Application | Model | How It Helps the User |
|---|---|---|
| Staff housing block | WL-RF8 | Each worker charges on a personal card the landlord can audit |
| University dormitory | WL-RF8 | Dorm cards double as charging cards with quota limits |
| Fleet yard with driver cards | WL-RF8 | Every session ties to a driver ID for cost reporting |
| Social housing tower | WL-RF8 | Card access stops unauthorized corridor charging |
| Factory canteen wall | WL-RF8 | Shift workers charge during meals with tiered daytime rates |
Certified EV Charging Manufacturing for Global Markets
Buyers who ship containers of charging stations need more than a price list. The production and QC flow below is what lets a distributor open a carton and trust what is inside:
- A 48-hour continuous-load rack cycles every station to catch relay and meter failures early
- CE, RoHS and IEC 61851-1 documentation ships with every commercial order
Lot samples from every production run are measured for metering accuracy, protection trip times and enclosure sealing before the cartons are sealed, and the numbers are recorded per batch. A buyer can request those records with any order.
Why Choose Wanlin as Your EV Charging OEM Manufacturer
Against the three suppliers shortlisted, the deciding rows were reliability data and response speed.
| Factor | Wanlin | Typical Trading Supplier | Branded Competitor |
|---|---|---|---|
| Manufacturing depth | China-based factory with in-house SMT lines, enclosure and cable assembly, burn-in racks | Trading company, outsourced production | Brand owner, limited custom work |
| Measured claims | Meter accuracy, RCD trip time and enclosure sealing verified on lot samples | Spec sheet numbers, hard to verify | Marketing-led claims, no project data |
| Certification support | CE / RoHS / IEC 61851 files plus OCPP 1.6J conformance logs per model | Incomplete documents, customs risk | Brand-level only, no per-order files |
| Customization | Colors, logo, firmware, tariff logic, packaging from low MOQ | Stock models only | Fixed SKUs, no private label |
| Price (factory direct) | Tiered factory pricing with volume discounts | Unpredictable markups | Premium brand pricing |
EV Charging OEM Process: From Inquiry to Shipment
Here is the step-by-step path the order took, with the checkpoints that kept quality on track. A standard charging station OEM project then follows 8 steps:
- Tell Us Your Target Market - Southeast Asia, the Middle East, Europe, North America, Africa or Latin America; each market may require different certifications, socket standards, voltage classes and manual languages
- Select a Model Line - our team recommends WL-series platforms for your channel and price band, or works from a reference unit you send
- Verify Documentation - request certificate files, OCPP conformance logs and test reports for the exact model before you commit
- Confirm Customization - cabinet colors, logo, firmware behavior, tariff logic, payment flows and packaging
- Sample Evaluation - verify meter accuracy, load balancing and CSMS integration on real samples before scaling
- Confirm Production - after specifications, commercial terms and OEM details are locked
- Quality Inspection - lot samples are tested and every finished station passes hipot, trip-time and burn-in racks before packing
- Shipment - cartons leave FOB, CIF or DDP according to the agreed logistics terms
Customer Testimonials
Three buyers who ran the same evaluation shared what they told their purchasing committees.
- Somchai Prasert (EV Charging Station Distributor, Bangkok, Thailand): "The station we field-tested through the rainy season is the station we sell; our listing says IP54 and the field record proves it."
- Nguyen Hoang Minh (Charge Point Operator, Ho Chi Minh City, Vietnam): "The first 60 stations sold out in a month and the repeat order came before the first container cleared customs."
- Tran Van Bao (Delivery Fleet Manager, Cebu, Philippines): "The tuk-tuk model went into our fleet depot and paid for itself in metered revenue the first quarter."
Frequently Asked Questions
Q: How many cards can the WL-RF8 hold?
A: A 10,000-card local list runs offline, and lists sync from the CSMS when connected.
Q: What happens when the network drops?
A: Cards still authorize from the local list, sessions log to memory and upload on reconnection.
Q: Can one card work across our sites?
A: Yes, card IDs export in standard formats so operators can run shared or roaming schemes.
Q: Can we limit charging per card?
A: Yes, daily kWh or session quotas apply per card in the tariff engine.
Q: Does it still take QR payment for visitors?
A: Yes, QR wallet payment runs alongside card access on the same ports.
Project Summary
What the field test actually measured By working directly with manufacturer Wanlin, the Delivery Fleet Manager team in Cebu reached 30% higher margins on its charging line while keeping rider tariffs competitive. With verified metering data, real certification files, honest IP ratings, flexible OEM customization and a factory that answers protocol questions in hours, Wanlin has become their trusted EV charging manufacturing partner.
For more information: www.wanlinfire.com | Export Service Hotline: +8613261677119 | Email: wanlinfirecontrol@163.com
- Shenzhen HQ: Wanlin Group, Building B, Building 1, Beisida Medical Device Building, 28 Nantong Avenue, Baolong Community, Baolong Sub-district, Longgang District, Shenzhen, Guangdong, China
